As any pool owner knows, if you want a clean and fresh environment, you have to maintain your water feature quite regularly. This is the only way to make sure that algae doesn’t have a chance to grow on the walls or the bottom. By doing so, you can also get rid of any of the particles that may have flown in or the small critters that may have gotten trapped. Here, you will discover the right way to take care of your pool so that every time you dive in, you can be certain of your safety.
Always Use a Cover
Many of your problems can be eliminated if you just use Perth pool covers. It is a good idea to install one immediately. Of course, this is only really effective if you use it regularly. This means that once you are done swimming, the cover should be placed over the surface. To make things easier for you, you should invest in an automatic design. This way, with just the push of a button, you will be able to protect the water. This is an especially important device for those who have lots of trees or plants surrounding the area. By using the cover, you will be able to prevent leaves, flowers, and pollen from blowing in.
Dispose of Debris
One of the easiest (and quickest) things to do is to get rid of the debris that is floating in the water or that has collected in the skimmer basket. With a skimmer, you can remove the debris that is on the surface of the water. Just make sure to move it over the surface slowly and at the right angle so that you can catch everything. After you do this, you should turn your attention to the skimmer basket. Here, you will find leaves and lots of other rubbish. When you are disposing of all of this, make sure to do it far away from the pool. This way, there is no chance that it will blow back again into the water.
The above task is followed by something that takes a little bit longer and that can be a bit arduous. Nonetheless, it is still one of the most significant parts of your maintenance. You should always vacuum the bottom and the sides methodically, much like mowing your lawn. You can move the vacuum in parallel lines that overlap one another. If your pool is quite wide, don’t attempt to push the vacuum as far as it can go. Instead, first vacuum one side and then switch to the other.
Testing and Balancing the Water
There are several chemicals in the water and they must be adjusted properly. To make certain that the chlorine that you have added is effective, you will need a proper pH level of around 7.5. Adding muriatic acid to water will lower the level while a soda ash product will raise the level. The amount of free chlorine in the water should be between 1 and 3ppm.
These are the main points to remember when trying to keep your pool clean.